Wednesday, June 8, 2011

3 6 inches on ruler

3 6 inches on ruler. 3 INCHES RULER; 3 INCHES RULER
  • 3 INCHES RULER; 3 INCHES RULER



  • logiclife
    12-01 04:44 PM
    I dont think you can amend the labor petition's job description. You may have to file new labor again for new description.

    If I may ask, why are you so worried about job desc of labor and your everyday duties. Really, if they have changed a little bit, its not a big deal.

    There is a lot of overlap between what programmers do, what programmers/analysts do and what Business analysts do. I know a lot of business analysts who at times write their own code and a lot of programmers who document stuff - kind of documentation that BAs do.

    People who adjudicate cases at USCIS are not really IT guys who can differentiate between fine nuances like BA, programmers etc.

    Then again, we dont know much about your case, better talk to a lawyer if you are still not comfortable with your situation. Forums are not an alternate to professional legal advice. Be careful before you act on advice from forums. No one here is lawyer and no one here knows the full case. Spending 200 dollars to get the right legal advice when making important decisions is worth every penny.

    You can also submit your question for the free legal advice program we have (see the homepage) and your question would be taken up.





    3 6 inches on ruler. Description: This 6-inch
  • Description: This 6-inch



  • bmoni
    12-22 12:27 PM
    Thank you so much GC_2007.





    3 6 inches on ruler. PRINTABLE 6 INCH RULER ACTUAL
  • PRINTABLE 6 INCH RULER ACTUAL



  • optimystic
    03-20 01:46 PM
    I talk to USCIS CC/IO last week. She told me that it will take approx 90 days to assign my case to AO. So my case is still getting dust on room and not with officer. It's sucks but wait continue...
    PD: July 2001 (EB-3 India)
    RD: July 2nd 2007
    ND: Oct 10th 2007

    I have bigger problem to worry about. I am process of lay-off from employer whom I am working last 7 years. :)

    Oh..that hurts. I assume you will have to invoke AC21. All the best to you.

    90 more days? Which service center is your case located? I assume Texas? Did she explain whats the reason for the delay? Did she tell you about namecheck status? Are you planning on an Infopass? (sorry too many questions, but I think we are both on a similar boat )

    Looks like our PDs are very close to each other. Lets hope for the best.





    3 6 inches on ruler. The sizes are: ruler (12
  • The sizes are: ruler (12



  • pani_6
    12-07 10:50 PM
    Please post the name,PH#,state of the senator..for making it easy for others to call please.....

    Row the boat we are almost there



    more...


    3 6 inches on ruler. girls 6 inch paper ruler
  • girls 6 inch paper ruler



  • m.e.g.
    03-31 03:07 PM
    That is a good question....because I have tried to save it as PDF and an EPS as well seeing if that would work, but it doesn't even show up as an option to open on the Blend side. Only the .ai file showed up. But I will try to export it with the PDF options.
    I will mess around with it a bit...Be back in a sec...





    3 6 inches on ruler. camera…a lone 6-inch ruler
  • camera…a lone 6-inch ruler



  • GLIX
    02-22 06:14 AM
    it was already at july 13, 2006, now it's back at june? how could that happen?:confused:



    more...


    3 6 inches on ruler. to make six inch squares.
  • to make six inch squares.



  • sk2006
    04-22 07:57 PM
    Rasmussen Reports indicates in their latest poll that only 5% of Americans list immigration reform as a top priority, a number that is consistent with historical numbers but is much reduced from the last few years when anti-immigration activists whipped up a wave of nativism not seen in many years in the US. One of the reasons immigration measures big and small have not succeeded in recent years is because the entire issue of immigration has been perceived as radioactive and no one wanted to take on the crazies. As it becomes clear that dealing with immigration issues isn't something...

    More... (http://blogs.ilw.com/gregsiskind/2009/04/poll-americans-no-longer-all-that-concerned-about-immigration.html)

    Can we forward this to LIE DOBBS? :D





    3 6 inches on ruler. Altraco MKE-03 Digital 3 Piece
  • Altraco MKE-03 Digital 3 Piece



  • jthomas
    06-07 11:31 AM
    I don't think its a good time to change jobs. There are many who are looking for a job after getting laid off. I think till the 2nd quarter of 2010 just keep your job. I may be wrong too.
    the best thing is to keep a open eye all the time and whenever there is a opening in any big project with a good pay hike then move.
    If you have EAD then you don't have to worry about H1B transfer.

    If you like, Join the "job networking on IV" google group and you wouls find many members with your similar skillset.

    J thomas


    Hi
    I am trying to do a H1B transfer from my current employer.I am searching for a good employer(consulting firm) in Atlanta,GA area..

    Can anyone advise me on a good employer.I heard that Pyramid Consulting is one big vendor in atlanta..Any inputs about Pyramid is greatly appreciated..Or any other good vendors in atlanta area?

    Thanks
    kp



    more...


    3 6 inches on ruler. 6 Inch Deluxe Ruler
  • 6 Inch Deluxe Ruler



  • gcnyc
    06-20 11:29 PM
    Does any one know answer for this? I was curious to know.





    3 6 inches on ruler. 6-3/8quot;x9/16quot;, Mini,
  • 6-3/8quot;x9/16quot;, Mini,



  • ramus
    06-28 04:42 PM
    I am sorry.. I don't mean to hurt your feelings.. But this is rumer..

    Can you give me link or any other offical source which is saying same thing..
    You could have just put this in rumer thred.. Tell me is this helping one...

    Everybody is so busy and workiing hard on getting paper work done.. Why do we want to put more burden on them? IF this is true then everybody will know it from different sources. And plus even if this is true what can you do? Can you fight against USCIS?








    Hi ramus can you point to the others threads going on this subject?:o I did check other threads to put this info. In fact I don�t want create any new threads. After looking for one that is appropriate, which I did not find, I started this one. The closest one would be the �June 1st filers - receipt � which is a diffrent subject.

    This is not a rumor, this a fact and I thought I should share with all so that every one will chill, take it easy and will not stressout in anticipation of 485 approval.

    thx.



    more...


    3 6 inches on ruler. 6-Inch Magnifying Ruler
  • 6-Inch Magnifying Ruler



  • puskeygadha
    12-03 10:22 AM
    thanks so much guys
    my labor is in bpc
    I still have 18 months in H1B. but after I get my I140 I will switch
    if I feel that I cant file 485 for a while





    3 6 inches on ruler. 6 inches Plastic Ruler
  • 6 inches Plastic Ruler



  • sankap
    07-06 06:05 PM
    Why would you need an EVL from your new employer or inform the USCIS of your job change, in this case? AC21 does not require you to "file AC21" (whatever that means), contrary to what has been advised in this forum many times. Please Google "Yates memo;" see, e.g., http://www.shusterman.com/pdf/ac21-51205.pdf. Here are my attorney's comments in this regard:

    "AC21 is the name of the immigration act that allowed portability for those who have an approved I-140 and I-485 pending over 180 days. There are no regulations for this provision therefore no instructions regarding notification so there is no actual action to "invoke AC21". The Service will sometimes send out an RFE just prior to approving an I-485 to request confirmation that the individual is either still employed by the sponsoring employer or if not, that he/she was portable when changing positions which is evidenced by a letter from the new employer."

    I don't think you should request any thing from your new employer other than a job offer. You need an EVL *only* in case of an RFE. And no need to "file AC21!"



    more...


    3 6 inches on ruler. LoRan Magnet Board amp; 6 Inch
  • LoRan Magnet Board amp; 6 Inch



  • GCwaitforever
    08-16 11:21 AM
    I am just quoting another way to move from EB-3 to EB-2 without having to file for PERM labor etc ... if you are in the same company. If the original labor petition is qualified for EB-2, but I-140 was applied in EB-3 category then that same approved EB-3 I-140 petition could be used as a supporting document in lieu of original labor certification to file another I-140 EB-2 petition. This is assuming that the attorney filed I-140 in the wrong category first time.

    Of course if the original labor petition does not qualify for EB-2, but the applicant qualifies for EB-2 now, the applicant has to go through PERM again and port priority date from approved EB-3 I-140 to new EB-2 I-140 petition.

    I hope this clarifies everything. I am not an attorney. Use the information at your own risk.





    3 6 inches on ruler. nov 30, 2010 blank 16th inch
  • nov 30, 2010 blank 16th inch



  • cableching
    05-21 12:33 AM
    The example he has given is a special case. The guy needs H1, because his son was out of status. Something is missing in the case. The child came to US 10 years back on B2 and stayed on B2 forever without extending or changing the status???

    We need H1 only when we are not married or we have not filed I-485 for the dependants.



    more...


    3 6 inches on ruler. Printable ruler 64 inch - the
  • Printable ruler 64 inch - the



  • LookingForGC
    02-01 03:46 PM
    Congratulation Mr. You experience is always needed here, please stay in touch here.

    Good luck!





    3 6 inches on ruler. 6 inch centimeter ruler
  • 6 inch centimeter ruler



  • pitha
    07-18 11:08 AM
    we lost a golden oportunity to do a fund drive. Historically during good news period a lot of members participated in the fund drive, but because the IV website is broken and the threads are displayed irratically and not in the latest order the funding drive threads are hidden and irrelevant one post threads are showing up. We might have lost out on a 10 to 20k worth of funding because of this mistake. I request the core team to please fix this immediately. A lot of new members have joined IV and they might not particiapate in the funding drive because of this thread mistake.

    Let us all pledge to give atleast a $20, $50 monthly payments.



    more...


    3 6 inches on ruler. lt;3gt; 1x Bookmark 11.5cm x 6.5cm
  • lt;3gt; 1x Bookmark 11.5cm x 6.5cm



  • belmontboy
    04-18 11:53 PM
    Hi Folks,

    My fiancee is a MS student and currently has student loan in India being charged at 13.5%. I am wondering if there is any loan that i can get here with a lower interest rate to repay off the one in india.
    I would appreciate any pointers or suggestions here.





    3 6 inches on ruler. 15 centimetre / 6 inch ruler
  • 15 centimetre / 6 inch ruler



  • ddanait
    02-11 01:03 PM
    How does one access donor forum? I ahve donated some sum and I am a registered member





    3 6 inches on ruler. Also available in a 6 inch
  • Also available in a 6 inch



  • like_watching_paint_dry
    08-26 11:53 AM
    Dude it is pretty clear you dont belong here. If you joined a body-shop that replaced americans with cheap bodies then your employer violated the law and you were a willing accomplice. You are no better than an illegal alien. No wonder you are so scared of being replaced by yet another cheap body ! IV does not represent people like you.
    Now get the hell out of here.

    :D

    I want dixie as my spokesperson.





    anindya1234
    06-01 02:39 PM
    I dont know about others but for me stuck with the same compay for 5 years. I really want to move on !!


    Everybody has the same problem buddy





    desi3933
    02-18 06:17 PM
    I have a Green card and also my wife has GC .My wife is expected to deliver a baby.Shw wants the delivery to be in India and then come back...in that case what VISA will the new baby have to apply US when my wife returns back to US.

    Appreciate your help in this regard.

    She has come back to US before child turns 2 and it must be their first trip to US. No visa is needed for child and child will be provided green card on arrival.

    You need to carry documenation with you as not all airlines are aware of this rule that child can travel without visa.

    Again, it must be their trip back to US after child's birth.

    _________________
    Not a legal advice.



    No comments:

    Post a Comment